/library/oar/handle/123456789/68105 Wed, 05 Nov 2025 17:39:43 GMT 2025-11-05T17:39:43Z /library/oar/handle/123456789/68630 Title: Automation of the LHC collimator beam-based alignment procedure for nominal operation Abstract: The CERN Large Hadron Collider (LHC) is the largest particle accelerator in the world, built to accelerate and collide two counter-rotating beams. The LHC is susceptible to unavoidable beam losses, therefore a complex collimation system, made up of around 100 collimators, is installed in the LHC to protect its superconducting magnets and sensitive equipment. The collimators are positioned around the beam following a multi-stage hierarchy. These settings are calculated following a beam-based alignment (BBA) technique, to determine the local beam position and beam size at each collimator. This procedure is currently semi-automated such that a collimation expert must continuously analyse the signal from the Beam Loss Monitoring (BLM) device positioned downstream of the collimator. Additionally, angular alignment are carried out to determine the most optimal angle for enhanced performance. The human element, in both the standard and angular BBA, is a major bottleneck in speeding up the alignment. This limits the frequency at which alignments can be performed to the bare minimum, therefore this dissertation seeks to improve the process by fully-automating the BBA. This work proposes to automate the human task of spike detection by using machine learning models. A data set was collated from previous alignment campaigns and fourteen manually engineered features were extracted. Six machine learning models were trained, analysed in-depth and thoroughly tested, obtaining a precision of over 95%. To automate the threshold selection task, data from previous alignment campaigns was analysed to de ne an algorithm to execute in real-time, as the threshold needs to be updated dynamically, corresponding to the changes in the beam losses. The thresholds selected by the algorithm were consistent with the user selections whereby all automatically selected thresholds were suitable selections. Finally, this work seeks to identify the losses generated by each collimator, such that any cross-talk across BLM devices is avoided. This involves building a crosstalk model to automate the parallel selection of collimators, and seeks to determine the actual beam loss signals generated by their corresponding collimators. Manual, expert control of the alignment procedure was replaced by these dedicated algorithms, such that the software was re-designed to achieve fully-automatic collimator alignments. This software is developed in a real-time environment, such that the fully-automatic BBA is implemented on top of the semi-automatic BBA, thus allowing for both alignment tools to be available together and maintaining backward-compatibility with all previous functionality. This new software was used for collimator alignments in 2018, for both standard and angular alignments. Automatically aligning the collimators decreased the alignment time by 70%, whilst maintaining the accuracy of the results. The work described in this dissertation was successfully adopted by CERN for LHC operation in 2018, and will continue to be used in the future as the default collimator alignment software for the LHC. Description: PH.D. Wed, 01 Jan 2020 00:00:00 GMT /library/oar/handle/123456789/68630 2020-01-01T00:00:00Z /library/oar/handle/123456789/68629 Title: Evolutionary algorithms for globally optimised multipath routing Abstract: With the ever increasing rise of traffic generated on the Internet, the efficiency with which a network operates has become of great importance. The use of a distributed network architecture and single path routing algorithms limits the level of efficiency a network is able to sustain. To tackle this problem, a set of novel, globally optimal, multipath capable routing algorithms are proposed. The routing algorithms are designed to increase the total network flow routed over a given network, while giving preference to lower delay paths. Two routing algorithm frameworks are proposed in this work; one using Linear Programming (LP) and the other using a Multi-Objective Evolutionary Algorithm (MOEA). Compared to Evolutionary Algorithms (EAs), which are inherently sub-optimal, the LP routing algorithm is guaranteed to find a solution with the maximum load a network is able to handle without exceeding the link’s capacity. However, LP solvers are unable to concurrently optimise for more than one objective. On the other hand, EAs are able to handle multiple, possibly non-linear objectives, and generate multiple viable solutions from a single run. Even though EAs are inherently sub-optimal, the EAs designed here manage to satisfy, on average, 98% of the demand found by the optimal LP generated solution. All routing algorithms designed in this work make use of Per-Packet multipath because of its increased flexibility when compared to its Per-Flow multipath counterpart. It is well known that connection oriented protocols, such as TCP, suffer from severe performance degradation when used in conjunction with a Per-Packet multipath routing solution. This problem is solved by adding a custom scheduler to the Multipath TCP (MPTCP) protocol. Using the modified MPTCP protocol, TCP flows are able to reach a satisfaction rate of 100%, with very high probability even when that flow is transmitted over multiple paths. The combination of the modified MPTCP protocol and the designed routing algorithm(s) led to a network that is able to handle more load without sacrificing delay, when compared to OSPF under all the conditions tested in this work using network simulations. Description: PH.D. Wed, 01 Jan 2020 00:00:00 GMT /library/oar/handle/123456789/68629 2020-01-01T00:00:00Z /library/oar/handle/123456789/68552 Title: A tunnel structural health monitoring solution using computer vision and data fusion Abstract: Tunnel structural health monitoring is predominantly done through periodic visual inspections, requiring humans to be physically present on-site, possibly exposing them to hazardous environments. Drawbacks associated with this include the subjectivity of the surveys and, most of the time, the shutting down of operations during the inspection. To mitigate these, an increasing effort was made to automate inspections using robotics to reduce human presence and computer vision techniques to detect defects along tunnel linings. While defect identification is beneficial, comprehensive monitoring to identify changes on tunnel linings can provide a more informative survey to further automate inspection and analysis. CERN, the European Organisation for Nuclear Research has more than 50 km of tunnels which need monitoring. This raised the need for a remotely operated surveying system to monitor the structural health of the tunnels. Hence, a tunnel inspection solution to monitor for changes on tunnel linings is proposed here. Using a robotic platform hosting a set of cameras, tunnel wall images are automatically and remotely captured. The tunnel environment poses a number of challenges, with two of these being different light conditions and reflections on metallic objects. To alleviate this, pre-processing stages were developed to correct for the uneven illumination and to localise highlights. Crack detection using deep learning techniques is employed following the pre-processing stages to identify cracks on concrete walls. A change detection process is implemented through a combination of different bi-temporal pixel-based fusion methods and decision-level fusion of change maps. The evaluation of the proposed solution is made through qualitative analysis of the resulting change maps followed by a quantitative comparison with ground-truth changes. High recall and precision values of 81% and 93% were respectively achieved. The proposed solution provides a better means of structural health monitoring where data acquisition is carried out on-site during shutdowns or short, infrequent maintenance periods and post-processed off-site. Description: PH.D. Wed, 01 Jan 2020 00:00:00 GMT /library/oar/handle/123456789/68552 2020-01-01T00:00:00Z /library/oar/handle/123456789/68529 Title: Automated face reduction Abstract: With the introduction of the GDPR policy superseding the Data Protection Act, any individual has the right to delete and control any personal data. Removing frames from a footage and keeping the rest of the frames untouched is difficult to achieve. Moreover, surveillance footage is important to be left untouched since it is used as forensic evidence. Additionally, it will require a lot of manual work and time to be able to review the whole footage and then proceed to nd all the frames where the subject is visible and editing the footage. An alternative solution is to manually select the faces to be blurred throughout the footage. By blurring the faces, the actions remain legible and the footage will remain usable while also following the new regulations set by the GDPR. Semi-Automated Video Redaction methods exist commercially. For example, both IKENA Forensic and Amped FIVE software packages allow the user to specify the region of interest to be obfuscated. With the use of automated tracking techniques, the subject or object of interest is followed throughout the footage. While this tool facilitates the process, the user still needs to manually nd the person of interest within the video which can take a lot of time. Moreover, one major problem with these tools is that their licenses cost thousands of euros. In this dissertation, an autonomous face detector and recognizer is implemented to identify the individual within a crowd or group of people and obfuscate the face throughout the whole footage where the individual is present. The method developed during this dissertation automatically detects the person of interest within the video footage and his face is blurred. Once a match is found, the subject is back-tracked from the point of recognition to the beginning by making use of an optical ow algorithm to estimate the path taken by the subject to be able to blur the face in the previous frames. Afterwards, as the process finishes, the video is continued from the point of recognition till the end while also using the same tracking algorithm and blurring the face in the rest of the frames. The output will be the same video clip, however, the subject will have his face blurred throughout all of the frames. This makes the process require no human intervention. Extensive testing was carried out and it was evident that by implementing the system as non-real time will net better results. The reasoning behind this statement is due to the problem of resolution which hinders the performance of object detection. Being able to process the video and have the ability to easily manipulate the working conditions helped in achieving a recognition rate of 74% and an IoU of 0.783. Whilst working in real time, the user is dependent on the success of the detection. If the subject is not detected from the first frame that he is present in, this will result in the face not being blurred at that instant but rather become blurred further in the video frames. On the other hand, the non-real time method, although takes more time to complete will net better results since it makes use of object tracking to forward-track and back-track the subject once identified. Description: B.SC.(HONS)COMPUTER ENG. Wed, 01 Jan 2020 00:00:00 GMT /library/oar/handle/123456789/68529 2020-01-01T00:00:00Z